KubeVirt 虚拟机热迁移
|
Schrodingerscat
|
Kubernetes,KubeVirt,KVM
|
106
|
0

794 字
|
16 分钟

虚拟机热迁移

开启虚拟机热迁移

在 v0.56 版本之前，虚拟机热迁移需要开启 LiveMigration 特性功能，之后的默认开启了。

虚拟机热迁移要求：

  • PVC 必须支持 ReadWriteMany (RWX)，且必须是共享存储（可以用 NFS 创建个 PVC）
  • 虚拟机网络需要使用 masquerade 模式
  • virt-launcher POD 的 49152-49153 端口未被占用
  • virt-launcher Pod 的主网卡名称必须一致，在 Multus 里也要确保网卡为相同名称
[root@base-k8s-master-1 ~]# kubectl patch kubevirts.kubevirt.io \
    -n kubevirt kubevirt --type json \
    -p '[{"op": "add", "path": "/spec/workloadUpdateStrategy/workloadUpdateMethods", "value": ["LiveMigrate"]}]'
kubevirt.kubevirt.io/kubevirt patched
[root@base-k8s-master-1 kubevirt]# kubectl get kubevirts.kubevirt.io \
    -n kubevirt kubevirt -o jsonpath="{.spec}" | jq
{
  "certificateRotateStrategy": {},
  "configuration": {},
  "customizeComponents": {},
  "imagePullPolicy": "IfNotPresent",
  "workloadUpdateStrategy": {
    "workloadUpdateMethods": [
      "LiveMigrate"
    ]
  }
}

开启功能后不需要虚拟机，即可生效。

测试虚拟机热迁移

测试前先说一下虚拟机配置：

  • 只有一个网卡，网卡设置为 masquerade 模式（网卡这个在写网络的时候再详细写）。
  • 有一个硬盘，硬盘对应的 PVC 为 RWX 模式，来源为 Ceph RBD，是共享存储。

PVC 好理解，网卡这个看 TroubleShooting 章节。

# 检查当前状态
[root@base-k8s-master-1 ~]# kubectl get vm,vmi,pod
NAME                                   AGE     STATUS    READY
virtualmachine.kubevirt.io/my-vm       3d22h   Running   True

NAME                                           AGE     PHASE     IP              NODENAME                        READY
virtualmachineinstance.kubevirt.io/my-vm       23h     Running   10.100.171.26   base-k8s-worker-2.example.com   True

NAME                                READY   STATUS      RESTARTS   AGE
pod/virt-launcher-my-vm-j4ggh       2/2     Running     0          23h

# 开始迁移
[root@base-k8s-master-1 kubevirt]# virtctl migrate my-vm
VM my-vm was scheduled to migrate

# 查看过程
# 查看 vm,vmi,pod
[root@base-k8s-master-1 ~]# kubectl get vm,vmi,pod
NAME                                   AGE     STATUS    READY
virtualmachine.kubevirt.io/my-vm       3d22h   Running   True

NAME                                           AGE     PHASE     IP              NODENAME                        READY
virtualmachineinstance.kubevirt.io/my-vm       23h     Running   10.100.171.26   base-k8s-worker-2.example.com   True

NAME                                READY   STATUS              RESTARTS   AGE
pod/virt-launcher-my-vm-j4ggh       2/2     Running             0          23h
pod/virt-launcher-my-vm-zjrkb       0/2     ContainerCreating   0          2s

[root@base-k8s-master-1 ~]# kubectl get vm,vmi,pod
NAME                                   AGE     STATUS    READY
virtualmachine.kubevirt.io/my-vm       3d22h   Running   True

NAME                                           AGE     PHASE     IP              NODENAME                        READY
virtualmachineinstance.kubevirt.io/my-vm       23h     Running   10.100.171.26   base-k8s-worker-2.example.com   True

NAME                                READY   STATUS      RESTARTS   AGE
pod/virt-launcher-my-vm-j4ggh       2/2     Running     0          23h
pod/virt-launcher-my-vm-zjrkb       2/2     Running     0          8s

[root@base-k8s-master-1 ~]# kubectl get vm,vmi,pod
NAME                                   AGE     STATUS      READY
virtualmachine.kubevirt.io/my-vm       3d22h   Migrating   True

NAME                                           AGE     PHASE     IP              NODENAME                        READY
virtualmachineinstance.kubevirt.io/my-vm       23h     Running   10.100.171.26   base-k8s-worker-2.example.com   True

NAME                                READY   STATUS      RESTARTS   AGE
pod/virt-launcher-my-vm-j4ggh       2/2     Running     0          23h
pod/virt-launcher-my-vm-zjrkb       2/2     Running     0          9s

[root@base-k8s-master-1 ~]# kubectl get vm,vmi,pod
NAME                                   AGE     STATUS    READY
virtualmachine.kubevirt.io/my-vm       3d22h   Running   False

NAME                                           AGE     PHASE     IP              NODENAME                        READY
virtualmachineinstance.kubevirt.io/my-vm       23h     Running   10.100.223.12   base-k8s-worker-1.example.com   False

NAME                                READY   STATUS      RESTARTS   AGE
pod/virt-launcher-my-vm-j4ggh       2/2     Running     0          23h
pod/virt-launcher-my-vm-zjrkb       2/2     Running     0          12s

[root@base-k8s-master-1 ~]# kubectl get vm,vmi,pod
NAME                                   AGE     STATUS    READY
virtualmachine.kubevirt.io/my-vm       3d22h   Running   True

NAME                                           AGE     PHASE     IP              NODENAME                        READY
virtualmachineinstance.kubevirt.io/my-vm       23h     Running   10.100.223.12   base-k8s-worker-1.example.com   True

NAME                                READY   STATUS      RESTARTS   AGE
pod/virt-launcher-my-vm-j4ggh       1/2     NotReady    0          23h
pod/virt-launcher-my-vm-zjrkb       2/2     Running     0          12s

[root@base-k8s-master-1 ~]# kubectl get vm,vmi,pod
NAME                                   AGE     STATUS    READY
virtualmachine.kubevirt.io/my-vm       3d22h   Running   True

NAME                                           AGE     PHASE     IP              NODENAME                        READY
virtualmachineinstance.kubevirt.io/my-vm       23h     Running   10.100.223.12   base-k8s-worker-1.example.com   True

NAME                                READY   STATUS      RESTARTS   AGE
pod/virt-launcher-my-vm-j4ggh       0/2     Completed   0          23h
pod/virt-launcher-my-vm-zjrkb       2/2     Running     0          14s

# 每次用 virtctl 迁移都会自动创建一个 VirtualMachineInstanceMigration 资源
# 查看 VirtualMachineInstanceMigration 的变化
[root@base-k8s-master-1 kubevirt]# kubectl get virtualmachineinstancemigrations.kubevirt.io
NAME                        PHASE        VMI
kubevirt-migrate-vm-8jzrj   Scheduling   my-vm
[root@base-k8s-master-1 kubevirt]# kubectl get virtualmachineinstancemigrations.kubevirt.io
NAME                        PHASE       VMI
kubevirt-migrate-vm-8jzrj   Running     my-vm
[root@base-k8s-master-1 kubevirt]# kubectl get virtualmachineinstancemigrations.kubevirt.io
NAME                        PHASE       VMI
kubevirt-migrate-vm-8jzrj   Succeeded   my-vm

补充两点：

  • 可以看到迁移成功后多了一个 Completed 的 Pod，不需要手动清理，可以不管，非要清理的话找机会用 virtctl 重启虚拟机，多余的 Pod 就会自动清理。

  • 除了 virtctl migrate my-vm 迁移虚拟机，还可以通过创建 VirtualMachineInstanceMigration 资源来触发迁移。

    [root@base-k8s-master-1 kubevirt]# cat migratiom.yml
apiVersion: kubevirt.io/v1
kind: VirtualMachineInstanceMigration
metadata:
name: migration-job-my-vm
spec:
vmiName: my-vm

[root@base-k8s-master-1 kubevirt]# kubectl apply -f migratiom.yml
virtualmachineinstancemigration.kubevirt.io/migration-job-my-vm created

[root@base-k8s-master-1 kubevirt]# kubectl get virtualmachineinstancemigrations.kubevirt.io
NAME                        PHASE       VMI
kubevirt-migrate-vm-8jzrj   Succeeded   my-vm
migration-job-my-vm         Succeeded   my-vm

[root@base-k8s-master-1 ~]# kubectl get vmi
NAME        AGE     PHASE     IP              NODENAME                        READY
my-vm       24h     Running   10.100.171.16   base-k8s-worker-2.example.com   True

    可以看到刚刚在 Worker-1 的虚拟机又回到了 Worker-2。

查看 VM 和 VMI 的迁移记录

[root@base-k8s-master-1 kubevirt]# kubectl get vmi my-vm -o yaml
status:
...output omitted...
  migrationMethod: LiveMigration
  migrationState:
    completed: true
    endTimestamp: "2025-03-06T14:41:24Z"
    migrationConfiguration:
      allowAutoConverge: false
      allowPostCopy: false
      bandwidthPerMigration: "0"
      completionTimeoutPerGiB: 150
      nodeDrainTaintKey: kubevirt.io/drain
      parallelMigrationsPerCluster: 5
      parallelOutboundMigrationsPerNode: 2
      progressTimeout: 150
      unsafeMigrationOverride: false
    migrationUid: c5b21506-2583-4b03-9596-d66211bc8bdc
    mode: PreCopy
    sourceNode: base-k8s-worker-2.example.com
    sourcePod: virt-launcher-my-vm-ckxgp
    startTimestamp: "2025-03-06T14:41:20Z"
    targetDirectMigrationNodePorts:
      "39065": 49152
      "39073": 0
    targetNode: base-k8s-worker-1.example.com
    targetNodeAddress: 10.100.223.21
    targetNodeDomainDetected: true
    targetNodeDomainReadyTimestamp: "2025-03-06T14:41:23Z"
    targetPod: virt-launcher-my-vm-6mj5h
  migrationTransport: Unix
  nodeName: base-k8s-worker-1.example.com
  phase: Running
  phaseTransitionTimestamps:
  - phase: Pending
    phaseTransitionTimestamp: "2025-03-05T14:27:25Z"
  - phase: Scheduling
    phaseTransitionTimestamp: "2025-03-05T14:27:25Z"
  - phase: Scheduled
    phaseTransitionTimestamp: "2025-03-05T14:27:27Z"
  - phase: Running
    phaseTransitionTimestamp: "2025-03-05T14:27:30Z"
...output omitted...

这里我做过其他迁移测试，所以里边的信息和上边测试的记录对不上了，但是也是一个迁移的记录。

停止迁移

# 通过 virtctl 停止
[root@base-k8s-master-1 kubevirt]# virtctl migrate-cancel my-vm
VM my-vm was scheduled to migrate-cancel

# 通过删除 virtualmachineinstancemigrations.kubevirt.io 资源停止
[root@base-k8s-master-1 kubevirt]# kubectl delete virtualmachineinstancemigrations.kubevirt.io kubevirt-migrate-vm-bs7cl
virtualmachineinstancemigration.kubevirt.io "kubevirt-migrate-vm-bs7cl" deleted

可以看到如下状态：

[root@base-k8s-master-1 kubevirt]# kubectl get vmi my-vm -o yaml
status:
...output omitted...
  migrationState:
    abortRequested: true
    abortStatus: Succeeded
    completed: true
    endTimestamp: "2025-03-06T15:02:26Z"
    failed: true
    failureReason: 'Live migration aborted '
...output omitted...

TroubleShooting

迁移报错网卡问题

迁移时报错：

[root@base-k8s-master-1 ~]# virtctl migrate my-vm
Error migrating VirtualMachine Internal error occurred: admission webhook "migration-create-validator.kubevirt.io" denied the request: Cannot migrate VMI, Reason: InterfaceNotLiveMigratable, Message: cannot migrate VMI which does not use masquerade, bridge with kubevirt.io/allow-pod-bridge-network-live-migration VM annotation or a migratable plugin to connect to the pod network

原因在于我创建的虚拟机网卡为网桥模式，需要手动指定网卡为 masquerade 模式。

查看虚拟机状态：

[root@base-k8s-master-1 kubevirt]# kubectl get vm my-vm -o yaml
...output omitted...
status:
  conditions:
...output omitted...
    - lastProbeTime: null
      lastTransitionTime: null
      message: cannot migrate VMI which does not use masquerade, bridge with kubevirt.io/allow-pod-bridge-network-live-migration
        VM annotation or a migratable plugin to connect to the pod network
      reason: InterfaceNotLiveMigratable
      status: "False"
      type: LiveMigratable
    - lastProbeTime: null
      lastTransitionTime: null
      message: 'InterfaceNotLiveMigratable: cannot migrate VMI which does not use
        masquerade, bridge with kubevirt.io/allow-pod-bridge-network-live-migration
        VM annotation or a migratable plugin to connect to the pod network'
      reason: NotMigratable
      status: "False"
      type: StorageLiveMigratable
...output omitted...

查看当前虚拟机配置：

[root@base-k8s-master-1 kubevirt]# kubectl get vm my-vm -o yaml
...output omitted...
  template:
    metadata:
      creationTimestamp: null
    spec:
      architecture: amd64
      domain:
        cpu:
          cores: 1
        devices: {}
        machine:
          type: q35
        memory:
          guest: 513Mi
        resources: {}
      terminationGracePeriodSeconds: 180
...output omitted...

添加网卡配置如下：

[root@base-k8s-master-1 kubevirt]# kubectl get vm my-vm -o yaml
...output omitted...
  template:
    metadata:
      creationTimestamp: null
    spec:
      architecture: amd64
      domain:
        cpu:
          cores: 1
        devices:
          interfaces:       # 添加配置
          - masquerade: {}  # 添加配置
            name: default   # 添加配置
        machine:
          type: q35
        memory:
          guest: 513Mi
        resources: {}
      networks:         # 添加配置
      - name: default   # 添加配置
        pod: {}         # 添加配置
      terminationGracePeriodSeconds: 180
...output omitted...

重启虚拟机：

[root@base-k8s-master-1 ~]# virtctl restart my-vm
VM my-vm was scheduled to restart

# 查看虚拟机状态
[root@base-k8s-master-1 kubevirt]# kubectl get vm my-vm -o yaml
...output omitted...
status:
  conditions:
...output omitted...
  - lastProbeTime: null
    lastTransitionTime: null
    status: "True"
    type: LiveMigratable
  - lastProbeTime: null
    lastTransitionTime: null
    status: "True"
    type: StorageLiveMigratable
...output omitted...
KubeVirt 虚拟机热迁移
https://www.linuxstudynotes.com/2025/03/06/k8s/kubevirt-%e8%99%9a%e6%8b%9f%e6%9c%ba%e7%83%ad%e8%bf%81%e7%a7%bb/
KubernetesKubeVirtKVM
暂无评论

发送评论 编辑评论 


				

			

						

				

					

						

							

								
							

							
						

					

				

				

					

						

							

								
							

							
						

					

				

				

					

						

							

								
							

							
							
															
													

					

				

			

			
			

				

					
				

			

				

											

							
							
						

																

							
							
						

															
					
											
						

	

		
|´・ω・)ノ
ヾ(≧∇≦*)ゝ
(☆ω☆)
（╯‵□′）╯︵┴─┴
￣﹃￣
(/ω＼)
∠( ᐛ 」∠)＿
(๑•̀ㅁ•́ฅ)
→_→
୧(๑•̀⌄•́๑)૭
٩(ˊᗜˋ*)و
(ノ°ο°)ノ
(´இ皿இ｀)
⌇●﹏●⌇
(ฅ´ω`ฅ)
(╯°A°)╯︵○○○
φ(￣∇￣o)
ヾ(´･ ･｀｡)ノ"
( ง ᵒ̌皿ᵒ̌)ง⁼³₌₃
(ó﹏ò｡)
Σ(っ °Д °;)っ
( ,,´･ω･)ﾉ"(´っω･｀｡)
╮(╯▽╰)╭
o(*////▽////*)q
＞﹏＜
( ๑´•ω•) "(ㆆᴗㆆ)
😂
😀
😅
😊
🙂
🙃
😌
😍
😘
😜
😝
😏
😒
🙄
😳
😡
😔
😫
😱
😭
💩
👻
🙌
🖕
👍
👫
👬
👭
🌚
🌝
🙈
💊
😶
🙏
🍦
🍉
😣
Source: github.com/k4yt3x/flowerhd
	

	

		
颜文字
Emoji
小恐龙
花!
	


									

			

			
			
		

	






上一篇
下一篇